Already taken the door card off, undone the screws/bolts that hold the mechanism in place, but the window is still attached. Is there more srews holding the window to the mechanism (reason for changing is that the motor has died)|||Just remove the motor %26amp; replace that if you can get to it.|||From what I can remember you need to look at the bottom of the window, you will see that there is a metal slide with two plastic rollers. These rollers are attached to the window mechagnism by ball joints, you need to put a long flat head screw driver between the roller and the metal mechagnism. Twist the screw driver and the ball joint should pop out, they can be a little tight so you may need to use a lot of force to get them out.
Once you have the ball joint split you will need to lift th window up as high as you can and then try to remove the window mechagnism with the motor out on of the holes in the inside of the door.
Ja.
